How To Jailbreak iOS 6.0.1 On iPhone 4, 3GS And iPod Touch 4th Gen


Yesterday, November 1st, Apple released iOS 6.0.1 to the public. Initially, I decided to wait to make a tutorial for the new 6.0.1 firmware until the iPhone Dev Team pushed out an updated version of Redsn0w. However, due to numerous questions I’ve received pertaining to the Jailbreak, I decided to create this in-depth tutorial to assist my readers and viewers. This tutorial will guide you through the simple steps required to Jailbreak iOS 6.0.1.

First, before we begin, you Will Need the following:

  • An A4 (iPhone 4 and 4th Generation iPod touch) device or older (iPhone 3GS new and old bootrom) running Apple’s latest iOS 6.0.1 firmware.
  • Redsn0w 0.9.15b3 and your device’s corresponding 6.0 IPSW (available in the download section)

Steps:

1. Open the latest version of Redsn0w after downloading it from our download page.

  • If you’re on either Windows Vista, Windows 7 or Windows 8, it’s required that you set the compatibility mode to Windows XP Service Pack 2 and run the program as an administrator by right clicking.
  • If you’re on an OS X-based PC, a Mac, simply right click or control click Redsn0w and click the option to “open” the program.

2. Plug your device into your computer via your USB cable and click “Extras”.

3. Choose the option to “Select IPSW” and point the Redsn0w selection window at your iOS 6.0 IPSW (not 6.0.1).

4. Once the IPSW has been identified, click “Ok”, navigate back to the main Redsn0w screen and click “Jailbreak”.

5. Ensure that the option to “Install Cydia” is checked by default, continue and enter DFU mode by following these simple steps:

  • Press and hold both the home and power buttons together for a total of ten seconds.
  • After ten seconds has passed, let go of the power button and continue holding the home button for an additional ten to fifteen seconds.

6. Once the process is finished, wait for your iPhone or iPod touch to reboot (the video shows exactly how long the process takes).

7. Close out of Redsn0w and reopen it (refer back to the first step if you’re on Windows XP, Windows 7, Windows 8 or a Mac).

8. Navigate to “Extras”, “Select IPSW”, browse for your 6.0 IPSW, click “Ok” to the prompt, select “Just boot” and enter DFU mode by following the instructions outlined in the fifth step.

Congratulations, you’re successfully Jailbroken on iOS 6.0.1! Make sure to watch my Jailbreak video tutorial on YouTube.

Download Redsn0w and iOS 6:

Redsn0w 0.9.15b3 for Mac
Redsn0w 0.9.15b3 for Windows
iOS 6.0 IPSW for the iPhone 4, 3GS and iPod touch 4th Generation

Semi Untethered: If you want to make your device semi untetheredfollow the instructions listed here after completing this tutorial. Thanks for reading and stay tuned for future iOS 6 Jailbreak tutorials!

Owner and webmaster of Jailbreak Tech Info. Tanner is also a professional Jailbreak tutorial writer, the main reporter for Jailbreak Tech Info and owner of the YouTube channel iCrackUriDevice. Feel free to shoot him an email at Tanner@BestTechInfo.com with any questions or comments.

  • That guy across the street

    i did everything i was supposed to and when it says waiting for boot then the next screen it says missing keys.plist for this build its a iphone 3gs 6.1.3 latest build

  • mitchpt

    umm i cant find the link for the mac download

  • http://www.facebook.com/raed.alamoudi.58 Raed Al-amoudi

    where’s the download section?

  • Wallace Fulton

    If you are looking for the 6.0.1 Jailbreak I found it
    Go To WWW.EVAD3RSJB.COMand get the file
    Thumbs up!!!

  • IHighlyDoubt

    uhh what the heck i cant find the 6.0
    only 6.0,1
    and the darn ispw isnt supported…

  • Mr. Xeta

    Alright, so when I click just boot it goes through everything. It stops at uploading stage one or whatever it says, and my ipod won’t turn on. What did I do wrong? Was it even my fault? How do I fix this?

  • louis irvine

    when i put in the last 3 characters of my serial number it says it cant find it. did this happen to anyone else can anyone help?

  • Louis irvine

    When I type in the last 3 characters it says it can’t find it?

  • alex

    Why do i get the exploit failed error?

  • Jamonoko

    I’ve problem : “that ipsw is not supported by this version of
    redsnow” when I trying to load iPhone2, 1_6.0_10A403_Restore for iPhone
    3gs.

    I don’t know why, please help me.

  • Jamonoko

    I’ve problem : “that ipsw is not supported by this version of
    redsnow” when I trying to load iPhone2, 1_6.0_10A403_Restore for iPhone
    3gs.

    I don’t know why, please help me.

  • Marva Hubbard

    A5/6 iDevices (iPhone 5/iPad Mini) Can Now Be Jailbroken
    I discovered a new tool yesterday, did it, and it worked!
    I got it on WWW.REDJB.COM

  • Bridgette Beasley

    WWW.REDJB.COM Has The released Files

    For The iOS 6.0.2 Untethered Jailbreak. iPhone 5 and iPad mini

    Thumbs up if it worked !!!

  • Bobby Carr

    WWW.REDJB.COM Has The New Files
    For The 6.0.2 Untethered Jailbreak. iPhone 4S and iPad 4
    100% working!!!!!

  • annonymous

    I’m jailbreaking my iphone 4s. I have downloaded the iphone 4s ios 6.0, it still said that is unsupported! Mind helping out? thanks

  • frankie

    the just boot option isnt working for me. says theres an error HELP!!!!

  • http://www.facebook.com/people/Fboy-Denis/1166799719 Fboy Denis

    Worked for me on iPhone 3GS worked fine, no problems :) Thanks iCU

  • Nelsona99

    what ipsw do i select for my iphone 4? the GSM or the CDMA?

    • Nelsona99

      also i am on 6.0.1

      • Jeff Nguyen

        if your on 6.0.1, you have to use the ipsw 6.0. for example if you have iphone 4 and your carrier is VERIZON, you would choose iphone 4 ios 6.0 (CDMA).

        • Nelsona99

          thanks

    • jeff

      depends on which carrier you have. GSM is used for iphone with the carrier T-MOBILE or AT&T. CDMA is for VERIZON & SPRINT. so you gotta choose which ipsw according to which carrier you have.

  • kit

    im yet another person stuck in the please wait screen with no answer to be found..

    i need to jailbreak this 6.0.1 so i can flash it to cricket, can anyone help?

  • javy

    my iphone 4 cdma is stuck on the please wait screen. how do i fix that?

  • Anna

    I have a broken home button. I’m stuck on the last part (Number 8).

  • Zann

    Can I do it untethered?

  • jannw

    it just says plaese wait! what can i do ?? Thanks!

  • Matt Lee

    does the jailbreak delete the text messages we current have?

  • gigixx

    It worked! THANK YOU SO MUCH! (:

  • Pinn

    Can i unlock iphone 3gs on 6.0.1 with ultrasnow as well?

  • Cherrie

    May I ask how long does it take for the cydia to go on

  • http://www.facebook.com/christian.gallegos.1238 Christian Gallegos

    So i tried using the jailbreak and i have an iPhone 4 (white) and my power button is broken and i needed to go into DFU mode so I used to extras way to get in there with the restore to dfu .ipsw and it worked so when i hit jailbrek everything seemed to work but then when it finished it took me to a black screen still on though so it doesnt really look black looks kinda really dark and you can see the backlight a little im assuming its recoverymode because itunes does detect my phone perfectlybut when i try to restore it says error. and i have no idea how to get back to a working state. i have money to get my power button fixed so if thats the only solution then i will probably do it. if there is a way without using the power button please help thank you!.

  • mauro escobar

    after i make the last step to get cydia on mi ipod 4g, i wait and it doesn´t happen anything, cydia is not there, and i did the exact samen thing on the video, can anyone help me with that?

  • angrydude

    Are you people crazy! There is no ios6.0 there! There is only 6.0.1! What happened to 6.0!

  • Raman

    Sir,
    Iphone 4 g ios6.0.1 Cydia Is installed but after rebooting Iphone the cydia not opening fack jailbreak software redsnow 0.9.15b3 not working cydia ios6.0.1

  • Raman

    Sir,
    Iphone 4 g ios6.0.1 Cydia Is installed but after rebooting Iphone the cydia not opening fack jailbreak software redsnow 0.9.15b3 not working cydia ios6.0.1

  • Raman

    Sir,
    Iphone 4 g ios6.0.1 Cydia Is installed but after rebooting Iphone the cydia not opening fack jailbreak software redsnow 0.9.15b3 not working ios6.0.1

  • anonymous

    when ios 6.1 comes out the 4s will have a tutorial on how to be jailbroken almost immediately right? will the iPad 4th generation have one too or is that still unknown?

  • anon

    hey so this works on the iPhone 4s?

  • jihad

    its stuck at ‘exploiting with l1merain’. ipodtouch 4g ios 6.0.1

  • Med

    thanks ur the best

  • Prashad

    What was the URL ? http:// bigbos…?

  • http://www.facebook.com/imirocki A’k Shay

    cydia crashing

  • SuspectWitness

    why no ipad 2 ? with this tutorial

  • http://twitter.com/cuttyainteasy zac cutright

    ok i downloaded the ipsw, but it doesnt save right, it will not let me drag and drop into the dialog box for redsnow to validate it, why?

  • the guy

    thanks it worked=)

  • koollife

    no service please help

  • AlienGearbox

    Everyone listen, its semi-untethered ONLY for the iPhone 4(There is a difference between the 4 and 4S)3Gs & iPod Touch. So everyone that has the iphone 4s just wait until 6.1, their will be an immediate jailbreak if you watch iCu’s videos you will know.

  • http://twitter.com/171Robinhood Ramneet Singh

    Can i delete the semitether app after the last step? Please rply!

  • charles

    Thank man it worked! I just had to follow the step :).

  • bob

    GSM or CDMA?

  • fadedDOMO420

    ipsw isnt working

    • fadedDOMO420

      i went to download site and downloaded iPhone4,1_6.0_10A403_Restore and it still says unsupported :( help

  • Bob

    this is tethered -_-

  • Callum Johnson

    If i jailbreak my iphone 3gs, will i lose everything on it?

  • money

    its taking a long time to reboot and I have started over more than once. What should I do?

  • ani

    i am struck at please wait.. and suddenly device get rebooted nt productive plz help

  • aditya

    just dont go into the scroll box..!! 6.0 will not be there.when u click the link a window will be opened there just right below that scroll box there will be latest firmwares clik 6.0 there……:) ENJOY…….!!!!! and DONT FORGET TO SUBCRIBE TO ICU!!!!!!………

  • http://twitter.com/ByeSkl_HiGirls BeltedMice

    when i download redsnow the .exe file aint there

  • andrewz

    Hi. Thanks for the tutorial! The process was pretty successful but it has an issue that I can’t open cydia again after the first time I rebooted my ipod 4th gen. I did every single steps that are listed, I’ve installed “just boot” and everything worked fine when I was done. Then I opened up cydia and installed Installous, rebooted my device, tried to open up again, then the cydia screen pops up and immediately gone. Can someone help me with this? Thanks!

  • Jack

    What IPSW do you use for an ipod touch 4G 6.0.1?

  • Zainal Abidin

    Is This Really Work Guys ??

  • matt

    wheres the download section?

  • Andrew

    it freezes on please wait please help

  • http://www.facebook.com/nelson.kwan.75 Nelson Kwan

    The downloads for the IOS 6 isn’t working for me. Help?

  • tango

    it’s d/l iPhone2 restore when I try to d/l for iPhone3 gs..

  • http://www.facebook.com/Chapo04 Adrian Rodriguez

    My Cydia won’t show plz help! I followed all the steps correctly and when it boots back up Cydia won’t pop out. Did i do something wrong? plz help

    • Hey man

      Redsnow>extras>just boot>select ipsw>go (put in dfu mode first)

  • Adrian

    My Cydia won’t show plz help! I followed all the steps correctly and when it boots back up Cydia won’t pop out. Did i do something wrong? plz help

  • Adrian

    My Cydia won’t show up! please help. i followed all the steps correctly and i wait to Cydia to pop out but i never does. Can someone tell me what i did wrong?

  • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

    if anyone got problem with your jailbreak. come drop me a message. or add me fb. iluvher-x3@hotmail.com

    • jacob51710

      please help im very frusterated with this it all works fine till the end whn i click on “just boot” then it runs that process and after it says please wait it says missing keys ect. ect. what is my error in this? how can i fix this? please get back to me soon i would really appreciate your help

      • http://www.facebook.com/MightyBuns69 Shericka Myers

        Mines worked fine til the end to and said that same thing..

  • bagoes4all

    i dont know with my ipod touch 4G … IPSW : iPod4,1_6.0.1_10A523_Restore

    tethered or semi tethered jailbreak …. everything is fine

    step by step to jailbreak my ipod 4G touch IPSW : iPod4,1_6.0.1_10A523_Restore

    ============

    1. Download IPSW iPod4_1_6.0_10A403_Restore ( everything must be SELECT THIS FILE before press jailbreaking or justboot )

    2. Enter DFU mode your idevice

    3. Open redsn0w_win_0.9.15b3

    4. Choose > EXTRAS > Select IPSW …… put IPSW iPod4_1_6.0_10A403_Restore ( not put

    iPod4,1_6.0.1_10A523_Restore because unsupported IPSW )

    5. Go To back and press >>> JAILBREAK <<< EXTRAS > Select IPSW agains ( step 4 …… put IPSW iPod4_1_6.0_10A403_Restore ( not put iPod4,1_6.0.1_10A523_Restore because unsupported IPSW )

    8. Select “JUST BOOT” and done wait until boot up your idevice … good luck

    • bagoes4all

      after jailbreaking … if you want to install INSTALLOUS ….or everything to RESPRING iDevice …. you must be make DFU Mode agains your iDevice and open agains the Redsnow and choose just boot ( dont forget to select IPSW iPod4_1_6.0_10A403_Restore before select “just boot” ) … good luck ….

    • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

      ur ipod touch 4. u need to change to 9.15b4 i think

  • brock

    my phone shows the pinapple on the screen for the final boot but never fully reloads.

  • iFocus2

    I’ve tried twice and the Cydia icon still isn’t showing up. Any suggestions? I have iPhone 4 and followed all the steps in the video.

  • TOM

    can people just not read, YOU CAN NOT JAILBREAK 4S YET !!!!, REGARDLESS OF WHAT IOS ITS ON !!!

  • Meq

    Ok, I download the firmware and its like a zipped file I unzip it but it dosen’t work….plzzz help

  • Emrankaka

    Hello Sir I was successfully jailbreak my iphone4gsm but i can’t install
    any software with itool or ifanbox so how can i install software . It’s
    say install fail verfication fill as….. and please tell me what should i do.

  • migeul

    i cannot find my ipsw !

  • http://www.facebook.com/daniel.wan.946 Daniel Wan

    is in the ios 6 jailbreak have iap cracker

    • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

      have

  • Emrankaka

    Hello Sir I was successfully jailbreak my iphone4gsm but i can’t
    install any software with itool or ifanbox so how can i install software
    . It’s say install fail verification fill as….. and please help me

  • Emrankaka

    Hello Sir I was successfully jailbreak my iphone4gsm but i can’t
    install any software with itool or ifanbox so how can i install software
    . It’s say install fail verification fill as….. and please help me

  • Emrankaka

    Please reply me what i have to do

  • Emrankaka

    Hello Sir I was successfully jailbreak my iphone4gsm but i can’t install
    any software with itool or ifanbox so how can i install software . It’s
    say install fail verfication fill as….. and please help me

  • Huss Marji

    worked like magic to me ! thanks

  • anonimous

    ey cuando el iphone se keda reetbook y se prende la pantalla

  • Anthony

    How long dose the please wait last my taking forever

  • Guest

    Where can i find the download for redsn0w

  • Joe Magdi

    where can i find my ipsw on windows 7 ?

  • Edgar

    Cydia does not appears on mi iphone 4 what should i do?

  • gustavo

    mine stops in the writting thing “please wait …”

  • joe

    i cant jailbreak my i pod touch4g (wasted my time)

  • Deee

    Does this work with iPod 4th gen?

  • CassMell

    Neither the CDMA or GSM iphone 4 6.0 are working for redsnow?

    • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

      i jailbreak only using CDMA

  • B73

    My redsnow will not let my ipsw load it says ” that ipsw ifle is not supported” what do i do?

  • asdfghjkl

    my redsnow software keeps on crashing when it says downloading the first step. it suddenly stops loading and i have to turn on my phone and restart the programme. i have tried it 3 times and its still the same

    • asdfghjkl

      it get stucks at “uploading first stage” and then a window pops out saying that redsnow has encountered a problem

  • http://twitter.com/Christopher1030 Chris™

    ipad mini giveaway

  • http://www.facebook.com/Lawliet.ryuzaki123 Ahmed Pain

    hi ,everything is fine , but my problem is i cant get any network serves in my iphone. how can i unlock my iphone to work on any sim . plzz help me and thx for the tutorial.

  • http://www.facebook.com/brandon.waller.528 Brandon Waller

    It went straight to the jailbreak icon. Never started to jailbreak…. just stayed at the downloading jailbreak…. never went on the next thing

  • Serg

    I jailbroke this iphone 4 on the ios 6, but now that I upgraded to 6.0.1 I followed all of the directions and it says “please wait” on the screen. In this video the phone does that for only a minute or two, whereas mine gets stuck there. I have att and I downloaded the Iphone4 ios6.0 firmware that says att. I got it from the links on this site. I had upgraded from 6.0 to 6.0.1 via Itunes. I also tried two different cables and tried it both with xp service pack 2 and 3 compatibility. Nothings getting me past this “please wait”. After about 10 minutes it just reboots,but no jailbreak. HELP!!! :D

  • pixxie

    how long does cydia take to come up

    • cool guy

      you have to booth tethered from extras in redsn0w to get cydia

  • Confused One

    Where is the download section ? Confused

    • twitch

      just above the comments

  • KervenKing

    Ipad Mini Giveaway!!!

  • Random Guy

    to me it says this IPSW isn’t supported by this version of redsnow. i have the redsn0w 0.9.15b3 and i have the Iphone 3gs 8gb (version 6.0.1) (10A523) and help?

  • hunterford

    where can i download redsnow 09.15b3 i can only get b2

  • Vincent

    I’ve jailbroken my iPhone 4 with 6.0.1 but cydia has not appear after 10mins. So normally how long does it take to appear?

  • http://twitter.com/Neak0h Nicolas

    “Exploit failed.” is what i get when i try to just boot. help anyone?

  • http://www.facebook.com/leonardo.nenga Leonardo Nenga

    Thanks for the tutorial ICU, my Iphone 4 (GSM) now officialy Jailbreak… thanks a lot..

  • http://www.facebook.com/gary.jeziorskigary Gary Jeziorski

    i have windows and a iphone 4 at&t i did everything step by step after i click installed cydia an put my phone in that mode it did the jailbreak but after 20 mins of please wait it did not go to the pineapple and dowload that other stuff thought maybe with windows it didnt have to but completed the steps and waited about an hour and never had cydia pop up on my phone what do i need to do to fix it?????? plz help if you know thank you

    • Im replying to a faggot

      No u fucking sped

    • Serg

      same problem here. Did you figure it out?

  • Marlosso

    doesnt work for me. iphone 4 and redsnow for windows. all the programs and firmwares are correct and it stilll says that the ispw is not compatible with the version of redsnow. help please

  • Trigger

    Hello, I have an iPhone 3G with iOS 6.0.1. I have been unsuccessful in jailbreaking or unlocking my iPhone to get Cydia. I have tried using the IPSW for 3GS but it keeps rejecting the files. Please help.

  • keith

    everything was done nicely and smooth but the cydia just did not appear after amin of wait.

  • cj

    hey mine does everything then stays on plese wait for ike 20 min then reboots, it never didd the pineaple thing, without cydia please help!!!!

  • rick Mid

    I start my cidicy app ant the app crash what now?

  • karan

    cydia and other default apps get crashed after resatart the ipod touch 4g please help…

  • Kiev

    What if my lock button is broken then what do i do ?

  • mike0281

    tells me that the version of the firmware does not support Redsnow

  • Luc

    still stucking on “Please Wait”? Someone help? Send messages to email please. iphone 4

  • hanz

    i can’t open my cydia after install semitether…same like in your video….what is the problem and the solution help pls….

  • Guest

    i can’t open my cydia after install semitether….. what is the problem???

  • http://www.facebook.com/S.D.Vert Vert Dinn

    you all can try A4 based on ios6.0.1…simply follow the steps for ios 6…all is the same…ive jailbreak my ipod touch 4 ios 6.0.1 with redsnow 0.9.13dev4 and ipsw 6.0…and finally install cydia by wifi(putty.exe)

    • http://www.facebook.com/gary.jeziorskigary Gary Jeziorski

      what do you mean because ive tried it his way after about 20 mins of please wait it just boots back up without the pinepple then when i close out redfox and redo with his process a little pineapple comes up and no cydia what do i do?

  • William Johnson

    is windows supposed to take 10 times longer

  • Patrick

    Been sitting on the “Downloading Jailbreak Data” Screen for much longer than the video?

  • gaza

    hi i want to downgrade to 5.1.1 how do i do this? thanks

  • fuck rosa

    rosa e sul blog

  • blake

    it says it cant support it and then when i tried it cydia wont open up

  • gresh14

    He clear?y states iPhone 4 and 3GS Not iPhone 4S

  • Mandr68

    If you read his first step he clearly says iPhone 4 and 3GS NOT IPHONE 4S

  • cass

    ios firmware is not supported by the redsnow latest version… please help! i cant jailbreak my itouch4g

  • lol

    cydia havent showed up

  • starkerkrieger

    iPad Mini Giveaway!

  • k

    I can’t semi tether jailbreak my iphone 4
    I’m using the current version of redsnow for 6.0.1

  • Mora

    how can i jailbreak without home button(mine stop working)?

  • http://www.facebook.com/yakup.eryener Yakup Eryener

    I can’t Jailbreak my iPhone 4S (6.0.1) it says that my ispw isn’t supported by the redsn0w. But it is the latest version of redsn0w. What is the problem?

    • cass

      i thought im the only one who currently experiencing this problem… :((( please help us guys… cant figure the solutions.. huhuhuhu

    • iToosieroll

      Read First!!! for (A4) devices only!!!

    • William Johnson

      when you follow the link to the ispw’s scroll down to the ios 6 not the 6.0.1

      • Toasty

        I’m looking- I don’t see 6. It goes from 5.1.1 straight to 6.0.1 I’m trying to jailbreak my Iphone 4..

        • gokudera

          same too

          • Ant

            yes same as me too.

        • http://www.facebook.com/profile.php?id=574015607 Tovah Chickadee

          *eyeroll* If you had actually paid attention, at the beginning of this article the author says you will need redsn0w, and the IOS 6, both of which can be found in the downloads section at the bottom of the article (above the comments section).

          • bagoes4all

            put…..IPSW iPod4_1_6.0_10A403_Restore
            do not put ….. iPod4,1_6.0.1_10A523_Restore
            because unsupported IPSW with redsnow bro

            • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

              you now want to jailbreak which phone?
              if you are window XP, window 7 or window 8 can be jailbreak

            • http://www.facebook.com/simo.fatih.7 Simo Fatih

              dude even if i select ios6.0 in extras will i still be running ios6.0.1 on a preserved baseband or will it fuck whit my baseband

        • ieacookiies

          r u version 6.0.1?

        • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

          r u version 6.0.1?

        • Nate

          i.o.s 6.0 is there u need to see under Download iOS 6 now! u will see it

      • http://www.facebook.com/simo.fatih.7 Simo Fatih

        dude even if i select ios6.0 in extras will i still be running ios6.0.1 on a preserved baseband or will it mess whit my baseband

    • Furious

      iPhone 4S is not supported. You may have to wait.

    • Gaylen

      Hello,
      I had the same problem. I have the iPod Touch 4th generation 6.0.1, and I tried all of the steps in this tutorial up until Redsn0w declined my ISPW. So I figured, if this is the newer version of Redsn0w (designed for 6.0.1), why in the world would we think that ios 6 would work on it? So I used the version before that, the b2 version instead of b3. Didn’t mess with the compatability, just ran as administrator, selected my ios 6, then quit Redsn0w after it says it is finished (NOTE you will NOT see Cydia right away), then start Redsn0w again (as administrator), select ios 6, then Just Boot. The Just Boot didn’t work for me the first time, so I tried it again and it worked. Don’t get discouraged.
      Hope this helped!

      • farmbabe84

        what did you do mine is saying its not supported by this version of redsn0w but i dont have an older version

    • ieatcookiies

      only can iphone 4, ipod 4 and 3GS.

    • http://www.facebook.com/jiawei.reallylovesyoulots Jiawei Reallylovesyoulots

      only can iphone 4, ipod 4 and 3GS.

    • http://www.facebook.com/cody.fountain.79 Cody Fountain

      the same thing is happening to me

    • High bass

      It’s only for a4 devices u have a5

  • RLM

    When it goes through the Jailbreak process, It gets stuck on “Please Wait…” and stays on that for a long time, It’s actually been 30mins now and it is still stuck on this Jailbreak screen saying, “Please wait…” Any suggestions, Please Help.

    • RLM

      This was being done with iPhone 4 iOS 6.0.1 Firmware 3.0.04

      • WHY

        same problem

        • iphone joe

          same here

    • Serg

      Please let me know if you figure this one out. I’m in the same boat as you.

  • dinh

    While I was waiting at the black screen with the “Please wait,” I waited for a while, but then it started to continue Jailbreaking. But then all of a sudden, it froze out and rebooted, but not to the pineapple picture. Didn’t see any pineapple picture when it was rebooted. Can you tell me what happen? I have an iPhone 4 iOS firmware 6.0.1

    • iHelpJailBreak

      After the Jailbreak process, it will reboot your iPhone and go back to the iPhone lock screen. You need to close redsn0w and re-open it, select extras > select IPSW > Then select your firmware and ” Just Boot ” and continue into DFU mode. This is the part where the Pineapple picture appears on the screen and starts going through its process.

  • Manu

    Is there a unteathered jailbreak for ios6 3gs (old boot rom)

  • BestTechInfo9523

    YOUTUBERS… please make a video about the untethered jailbreak for iOS 6 available at WWW.UNTETHEREDJAILBREAKDOWNLOAD.COM

  • TrueBlue92

    If jailbreak will it fix my Wifi ??

  • drew

    i cant update my ipod it says the 3194 error

    • Tanner Marsh

      Ensure that Tiny Umbrella isn’t setting your host file to Cydia on exit!

  • Sean

    when i do this jailbreak it works up until the part where i have to ‘just boot’ when this is happening it stops and says ‘missing Keys.plist data for this build

    • M

      (Quoting iHelpJailBreak)

      “After the Jailbreak process, it will reboot your iPhone and go back to the iPhone lock screen. You need to close redsn0w and re-open it, select extras > select IPSW > Then select your firmware and ” Just Boot ” and continue into DFU mode. This is the part where the Pineapple picture appears on the screen and starts going through its process.”

  • BestTechInfo3577

    jailbreak iOS 6 UNTETHERED has been released! WWW.UNTETHEREDJAILBREAKDOWNLOAD.COM

  • BestTechInfo5818

    Just jailbroke my iPhone 5 untethered! at WWW.IOS6UNLOCK.ORG

  • Harit

    I can’t get Cydia on ipod touch 4g when I entered theIPSW and clicked on Just boot.

    • Nima

      same problem…

    • a guy

      bro you have to click jailbreak on redsn0w first

    • Lerok

      The same…:

      “Missing Keys.plist ”
      :((((

  • adil

    i need jailbreak for iphone 4 6.0.1 plss

  • Wackywallytv

    I need jailbreak for ipad please untethered

  • http://www.facebook.com/barz1q Victor Mizov

    Is there going to be any jailbreak for the ipad 2 soon , any ideas :)

  • http://twitter.com/BamBamRicky Ricky BamBam

    How do I update to 6.0.1 on ipod touch 4th gen, with semi-tether already on it?

    • Liam

      6.0.1 has no major changes, you don’t exactly really need the update bro.