Jailbreak 5.0.1 iPhone 4,3Gs,iPod Touch 4,3 & iPad With Redsn0w


This post will walk you through the simple steps required to Jailbreak iOS 5.0.1 and the best part is that thanks to the new Redsn0w, you can be Jailbroken in a matter of minutes!

Steps (for Mac and PC users):


1. Download Redsn0w from the download section below and run it

  • If you’re on Windows Vista or Windows 7 then you should right click Redsn0w and set compatibility to windows XP (service pack 2) and then run it as the administrator

2. Go to “Extras”, hit “Select IPSW”, point it at iOS 5.0.1 and then go back to the main screen (NOTE if you get errors while pointing it at 5.0.1, just point it at the 5.0 IPSW for your device)

3. Hit “Jailbreak” and enter DFU mode by following these steps:

a. Hold down the power button for 3 seconds
b. Continue holding the power button and start holding the home button and continue HOLDING BOTH for 10 seconds
c. Let go of power and continue holding home button for 15-20 seconds

4. Select install Cydia and any other options you want (except “Install custom bundles”)

5. Wait for it to finish and reboot (the video shows how long the process takes)

6. Close out of Redsn0w – this step is VERY important

7. Open Redsn0w, go to “Extras”  hit “Select IPSW” and then point it at iOS 5.0.1 (NOTE if you get errors while pointing it at 5.0.1, just point it at the 5.0 IPSW for your device)

8. While you’re still under the “Extras” page, hit “Just boot” enter DFU mode again by following the instructions in step 3

You are now Jailbroken on iOS 5.0.1!

NOTE: you WILL need to follow steps 7 and 8 every time you need to reboot your iDevice!

Downloads:

Redsn0w 0.9.10b3 for Mac
Redsn0w 0.9.10b3 for Windows
Download the 5.0.1 / 5.0 IPSW for your device here

Click here to be taken to my video tutorial on YouTube

Stay tuned for future Jailbreak tutorials!

Devices it works for:
iPhone 3GS
iPhone 4
iPod Touch 3G
iPod Touch 4G
iPad 1
Devices it Doesn’t work for:
iPad 2
iPod touch 1G/2G (firmware not supported)
iPhone 2G/3G (firmware not supported)

Owner and webmaster of Jailbreak Tech Info. Tanner is also a professional Jailbreak tutorial writer, the main reporter for Jailbreak Tech Info and owner of the YouTube channel iCrackUriDevice. Feel free to shoot him an email at Tanner@BestTechInfo.com with any questions or comments.

  • Nikamar94

    whats the different between ios 5.o n ios 5.o.1? or just the same?

  • Coolmanprater

    it says no devices found what do i do?

  • Boukla

    Is emasing soxes  !

  • kfsjkfjsdf

    I always get a 60000 ms error when I try to jailbreak//install cydia. Please help!!

  • Jdstandokes

    When i try to download the redsnow and the option to select IPSW is clicked on. A box pops up but i can’t find anything about the 5.1 in there. So therefore its not identifying my ipad.

  • Pettere3wer2

    hi, i have 5.1 version, can i jailbreak my iphone 4?

  • Edfopefo

    5.1?

  • Brucejohnjavier

    hi. I have a question about my iphone 3g that has a version of 5.0.1. Can I still used your jailbreak program to jailbreak my phone? I have a windows vista. please help.

  • guy

    is this untethered

  • shortaygirl

    sweet baby jesus it worked. thanks so much!

  • Damizzoli

    After Jailbreak the Iphone says “invalid sim”. What should I do next?

    • See_loke

      you need to unlock your phone!!!

  • NEXXUS

    question…i am in the middle of jailbreaking my iphone 4 at the moment its at “please wait while your build is being processed”  “waiting to reboot”….. being that its an iphone does it usually take a while? just trying to get a idea on time to complete?

  • Giant81190

    after i hold the up button and home button the hold the home button for 15 sec the process is not moving what should i do?? please help!! should i cancel the process?

    • See_loke

      cancel & redo!

  • BobbieP

    i cant find the ipsw can u plz help me

  • http://www.facebook.com/profile.php?id=100002840299442 Sakura Morgan Avalon

    hey i just rebooted it and now my iphone 4 keeps turning on and off?? help pls thanks (i’ve seen the pineapple sign it say on screen for few seconds then disappear turn into apple sign then starts loading then apple sign again??)

  • http://profile.yahoo.com/IHTAJCMLQXUGWV5D5H2PQPDPTA Ann

    hi I cnt find the IPSW somebody please help me…..

    • See_loke

       see on top & find out where did u save it!!! —-Download the 5.0.1 / 5.0 IPSW for your device here

  • Slap_u_hard

    i dont know what to download..

    • See_loke

       Redsn0w 0.9.10b3 for Windows

      Download the 5.0.1 / 5.0 IPSW for your device here

  • Fanni

    I dont know whats going on, I have been following your instructions and everything went well, until I did the Just boot thing. I even had the pineapple logo come in, but now the iphone keeps loading and loading and the apple logo appears then disappears. I dont know what to do. If i stop the process half way, will the iphone work like it used to be before i started to jailbreak it?? Please, please help

    • Mimixboo

      this happened to mine as well.

    • Tbgnurmomma

      if your having problems just plug your phone into your computer and go to itunes and hit restore. that way your phone will be just like before you tried jailbreaking it.

  • Mark

    thx worked great for me

  • Dooonnn

    what we use for iphone 4 5.0.1 to jailbreak,, you told for ipod but i need for iphone 4 ,,5.0.1

  • Charlie8473063

    well done mate ive now got smileys for my laptop not redsn0w !!!!!!!!!!!

  • Joshfo12

    my ipod isnt working anymore why

  • Anonymous

    my ipod just went into recovery mode.

  • Bwew1974

    so are you downloading a PDF reader because that is all i see and there is like 4 links to down load from  and I’m confused

  • Jonhsaw

    have this work for someone?

  • lucas

    It this just beta version or perfect jailbreak? can i reboot after i jailbreak?

    • bigboot

      yes if it is untethered

  • Realasrain

    only installed 
    Cydia once and it worked, do I still have to do just boot ?? only thing I want to do is unlock the network for my mobile, is that what cydia do? I really not sure, because I only have one sim card ! pls answer me 

  • Ivan Wahyu

    hei bro, can you help me?
    i have ipad1 ios 5.01 jailbroken. But when i played game,i can’t listen music from that game. But when i listen music, i can listen sound from music. 
    Can you help me?

  • Jseib33

    where do i get this “firmware”?

  • Fahmi

    Thanks!

  • DANSOBOLANU

    USB DEVICE NOT  RECOGNIZED EVERY TIME I TRY TO CONNECT MY IPHONE TO ONE OF MY 5 PC… WTF IS THIS ?? CYDIA NOT WOKING SAFARI DEAD… HOW DO I UNJAILBREACK MY PHONE ? WITHOWT PC  , HUH ?    HOW DO YOU UNJAILBREACK 5.0.1 ???????????????????????????????????

    • http://www.facebook.com/profile.php?id=100002232861150 Khalid Khodair

      go to settings->general->reset->erase all content and settings that is the only way

    • Alikhann_ak47

       what motherboard u are using and what operation system u are using

  • Ronald Sabinay

    guys please help me…how can i download 5.0.1 IPSW for my Iphone4 thanks…

  • Garsh Simeus

    my ipod touch wont turn on i just got it help me!!!!!!

  • help me

    Help my itouch wont start up please help

    • M Abdul Hannan

      Have u restored it by iTunes?

  • Help!!!!!!!!!!!!!!!!!!!

    help my itouch is not turning on please help

  • Ningakiwirules

    i was half way through installing this then i just gave up because it is too hard but then i realized that my iPod touch 5.0.1 was off and i cant turn it on please help!!!!!!!!!! 

  • Fucku

    HOW THE FUCK DO U DO THIS SHIT

  • Fucku

    HOW THE FUCK DO U DO THIS SHIT

  • felix

    im doing everything right. the pineapple comes up at the very end but after that it just goes to the apple and switches between that and the loading cirlce. plesae help :( !

  • san metro

    until its not unlocked i won’t be able to use different SIM? how can I unlock my phone 4 so that I can use different SIM

  • http://www.facebook.com/profile.php?id=100001603982009 Âpßlê Tâng

    i cant event open my ipod now

  • Malte

    Have the untethered jailbreak to ios 5.0.1 released?

  • http://www.iphonelox.com/ jailbreak iphone

    Redsn0w make better application of jailbreak which create easier to application. Information make it perfect to use on iphone for better security. Sounds make well and attractive to it.

  • Atlantejr

    I have everything downloaded but the icons look totally different on mine there folders. Redsnow works but its not the pineapple thing and its not reading the ios 5.0.1 i need help!?!?

  • Mnoo

    i want only to ask you questions , if I turn my iPad off , I must be jail break again how I can fix that , Please ??!!

    • Pavivirito

      This is a tethered jailbreak meaning you cannot turn the ipad off without you having to reinstall the jailbreak. You want an unteathered jailbreak which is harder to find and get to work. But just search google for one.

  • mnoo

    thank you very very much fo this really amazing video , thank you

    • Jseib33

      yo, where do i get he ipsw firmware?

  • One8pcs

    wish my time ,, i have done my jailbreak everything done,, but evry time must to be DFU mode,after reboot
    suck,is not fix,, some is bug

  • One8pcs

    is suck,,
    evry time must to dfu mode,,after reebot,,suckk

  • Samuelimazeki

    men im stuck on iphone logo please help me

    • adadee

      you should search it on you tube cause that hapend to me too and i fixed mine

  • Shadowtm

    I tried this jailbreak a couple of times and I keep getting the same result, after the jailbreak, it will boot to the apple logo and then the spinning circle, and will stop at the spinning circle and just hang there. I’m originally running iOS 5.0.1, and I am using the 5.0 IPSW to jailbreak. I can’t even get it booted to do a tethered boot. Also, whenever I try and select 5.0.1 it says “uncatagorized build” or something like that, any tips? o ya, iPhone 4.

  • Omar420048

    and i have to restored withthe itunes

    • Samuelimazeki

      omar what did you do to bring it back please help me

      • JoeKimOfficial

        Go into DFU mode

  • Omar420048

    I download it and it works and everything but when i reboot it and turn on again only show the apple and stay like that

    • Bigmac12

      ur dumb. this is tethered. now you have to restore you’re iPod.

  • Norwegian Dude

    When I’m tryin’ to dowload themes and stuff, it just says: “Note: Cannot Locate Package”! Whats that all about??

  • Anonymous

    Is it semi-tethered or untethered?

  • Shaneee

    The CDMA approves with redsn0w, but the GSM doesnt. i dont know if theres a difference.. either way, i try to “Just Boot” after I got that whited out cydia, but then it makes my phone freeze. It goes from apple logo, to the loading symbol, then a chime. and repeats itself.

  • WORK!

    There is no iPod ipsw!

  • dntmesswitme

    i have iOS 5.0.1 but the IPSW is not working and i can’t find an ISPW for iOS 5.0

    • http://www.facebook.com/people/Ahmad-Omar/100001369898770 Ahmad Omar

      me2

  • Cassandraking1

    Go threw the above steps and then when i select IPSW file it says not supported by this version of redsnow… Help I have Iphone 4 5.0.1

    • Sacred_faction

      I just too have had this problem with redsnow on my iPhone 4, thats ver 5.0.1… If you do find out what the problem is please let me know email me or contact me from facebook please thx :/
      Email: sacred_faction@live.caFacebook name: Khris Charron

  • Rafekhegab

    Hey bro, thank you it’s very good video and work with my iphone 4 5.0.1 but why you didn’t continue to show us how to make it work with any sim card like t-mobile or other sim card please tell us how to make it work with any sim card :)

    thank you a lot :D

  • root

    iPad1,1_5.0.1_9A405_Restore.ipsw doesn’t seem to work on 
    Redsn0w 0.9.9b8 for Windows. The workaround does not seem to install Cydia.

  • adnan

    i am trying it on ipad2 version 5.0.1 and when i select ipsw file the error message appear “That ipsw is not supported by this version of Redsnow” i set the compatibilty on windows xp sp2 but the same problem. can any help?

    • Needhelp

      hi there! i have the same problem! Can you solve it now?

  • richygoodman

    what if  my ipod is alerady jailbroken with 4.3.3? will this also work?

  • Ronakmodi

    Dear i have upgrade my unlocked iphone 3gs with 5.0.1

    but now it dont get set up by error that no sim card installed in iphone u want to activated

    what should i do

    please let me know on ronakmodi143@gmail.com asap

  • Davejarrells

    thanks alot this works and did great on my 3gs with 5.0.1

  • Rafekhegab

    how can i make my iphone 4 5.0.1 unlock to work with t-mobile after i did this steps can you help me in that please ?

  • Rafekhegab

    thank you man it’s work i have cydia now :)
    but i don’t know how can i unlock my iphone 4 with cydia :(
    please help !!!

  • Sergioangel8

    Note: Your browser may change the ipsw-file into a zip-file. In that case, just rename it to end in .ipsw and iTunes will accept it.

  • Rafekhegab

    when I press download iphone 4 5.0 it’s give me iphone 3 5.0 to download is it okay or what ?
    Please Help !!!

  • Guitargod

    Help?! Whenever I get to the Boot process, it shows the pineapple and after it goes away the normal apple sign keeps popping up over and over. What did I do wrong?

  • Alycantropo

    hey jonnyand the people who said ipsw not supported, you have to use 5.0  in the redsnow and it will jailbreak 5.0.1

  • ilija

    i need to know how you pinpoit the ipsw file any one

    • ilija

      cmon 

  • anonymous

    Works Great Thankyou :)

  • Fgalvez1988

    perfect works great!!!

  • Pico

    how do i get it to recongize the ipod

  • johnny

    how come everytime i try to open the IPSW it says “that IPSW is not supported with this version of redsn0w” what do i do??????

  • link

    every time dude it says unrecoginzed build ?????? what dose that i  mean??? [lz help me?

  • Lighttimon

    dude every time i try it says connet to i tunes so what now??

  • Martin

    I cant boot tethered it says cannot identify build HELP PLS :(

  • Kilian9982

    where the fuck is the download link i cant ind it

  • Mathiasmuschen

    i cant open the firmaware !!! what can i do ??? i decompress it but i have foun a folder and nothing more !!!

  • http://www.facebook.com/iiiZYy Ismael Carrillo Junior

    mine is stuck on the pineapple logo do i have to wait for some time or what do i do?

  • Dalidady

    after just booting my device, the eaten pinaple shows up on my phone and it then stwitches between the apple logo and that circle loading logo on ur ipod any help?

    • GuitarGod

      Mine is doing that too. Did you figure out how to fix it?

      • Neattouch648

        mine is the same way…did y’all figure it out

    • Flickmy

      Hey.  I am also having the same problem.  Have not figured out how to solve it yet myself.  If anyone else solved this problem please let us know how.  Thanks

  • Mwatts830

    I really want to get my phone jailbroken… but everytime I put it in DFU mode, and it goes to jailbreak it… It winds up telling me that the ipsw is wrong. and the one I downloaded for my phone won’t work with it. It says something about a fingerprint not working and I have no idea how to fix it. Can anyone help?

    • Mwatts830

      and also, I downloaded the correct ipsw (the iphone 4 5.0.1) and then saved it to my desktop and everytime it says my ipsw is wrong I highlight that one and try to use it and it says it is not compatible with this version of redsnow. can someone please help me!?!?

      • Sherrick woodside

        download the iphone 5.0 and use that it will work

        • andi

          cannot find one for 5.0… where do i find it because im having the same problem

  • Hanan4ik

    i dont understand if i have the ipsw(700mb ios 5.0.1) i dont need to download the ios 5.0.1 from itunes becuase now i have 4.3.5 

    • Luisjossue

      Well if you are gonna upgrade firmware, you dont really have to download your firmware again from itunes
      Just plug yoyr device to your computer open up itunes press SHIFT and the UPDATE BUTTON from itunes at the same time, chosse the your 5.0.1 and thats it

      Hope it works for you

  • Weiquan_asd

    guys if u want to download the 5.0, it is at the bottom of the list of devices compatible for the jb

  • Marty

    i have watched this 50 times and yet still way to fast for me !! seems so simple but to be honest  your a little to fast for me, shame

  • Ut2729

    Is this an untethered JB?

    • Luisjossue

      no is not

  • niggerfaggot

    guys for those of you getting the unsopprted error, JB follwoing this guide but instead of selecting 5.0.1, select 5.0.0 and then when its done, go to just boot with 5.0.0 still selected. worked for me and im on apple’s 5.0.1.

  • Ars297_92

    It seems to be that almost for sure,if u r on windows,u cant use 5.0.1 ipsw when u have to “select ipsw” in redsnow.However u still need it as of course you first have to RESTORE ur device(not UPDATE) TO 5.0.1.So after restoring,go to redsnow and select ios5.0 ipsw.And then do all the stuffs shown in  the video above.IT WILL WORK.

  • melanie

    what do you mean point to 5.0? where can i find that? do i need to download it? somebody help me pls…

  • help

    when i open the cidia then almost all my files delete what do to

  • Arjesster

    this is semi tether

  • S1eyley

    im still on 4.3.3 do i have to restore my iphone 4 first or just go straight to update iphone? cheers

  • guest

    is this semi untether or is it untethered

  • Andreius

    Is it risky? Can i break down the ipod if i do this?

    • Luisjossue

      not really if something goes wrong just restore your device and try again

  • Yas13

    guys im from the middle east and i have a question. whick ipsw should i download ng GSM or CDMA? thnks

  • Yas13

    guys im from the middle east and i have a question. whick ipsw should i download ng GSM or CDMA? thnks

    • Zippo

      if your using a sim card then download gsm if not then cdma

  • Huy Uyen

    i just solved my problem. 
    1.  you hv to download the IPSW 5.0 and point to it instead of 5.0.1.  this is also explained above.
    2.  This was my problem. if you are using Windows 7 or XP, make sure you right click Redsn0w and set compatibility to windows XP (service pack 2) and then run it as the administrator.   this is also explained above.

    good luck

  • Huy Uyen

    Why my Cyndia only urns on briefly only even after i hv completed ll the steps?

  • Ezekiel L M

    this worked partial for me but cydia is only showing up as a white square on my screen and i can’t see anything

  • Levan

    Newest version is 5.0.1 9A405 and the newest redsn0w(0.9.9.B8) doesnt work with this version. You cant downgrade from this version with any other IPSW and basivly we are fucked!! waiting for new redsnow! PLS redsnow make B9

  • ineedhelpsir

    I have the same problem as with everyone! RedSnow does not support this! damn we need a Fix pls! :(

  • Soimjustin

    i cant find the 0.5 firmware :(

  • Anonymous

    I’ve had my iPhone 4 for a while. If i jailbreak will i lose all my apps and the game data? Thanks for the help

  • Freestyler-99

    i says redsnow is not compatible with the ipsw version 

  • Fraidoonbahram

    it doesnt work with the version of redsnow it says it doesnt support this version 

    • Di

      mine doesn’t work either!!! :(

  • JailBr3ak3r

    Guys Do it through Ios 5 firmwire ipsw on r redsn0w it ll be jailbreaked ..

    Enjoy ..:)
    I ve just done it now …

  • M ABDUL HANNAN

    I THINK IPSW IS THE UPDATE FOR IOS 5.0.1 SO IF I HAVE ALREADY UPDATED MY IPOD 4 THEN DO I REQUIRE DOWNLOADING IPSW???

  • dann

    hopeless man

  • Austen

    ipsw still not working can u update asap???

  • Joeyristich

    when i select ipsw dose not show me iso 5.0.1

  • http://twitter.com/RainMak3r Ra!nMak3r

    @fce861674ac436b269e38dba01ec29e6:disqus  find or download the iOS 5.0 firmwire for your iDevice. redsn0w can jailbreak iOS 5.0.1 but it it isn’t updated so it says it is not supporting it. Just do as I say and voila!

    • Esbrock

      This worked for me. I have iPhone 4 5.0.1 CDMA.

  • Suckmydick

    IPSW is not supported! WTF!

  • Sasooca

    a million thnx

  • http://www.facebook.com/people/Manuel-Lopez/100001043261647 Manuel Lopez

    it says that ipsw is not supported by this version of redsnow??? what do i need to do in order for it to be supported by redsnow. Reply to me if you know the answer to this i greatly appreciate anyone who will answer me

  • Adonii22

    Ok So I Did Everything You Said An Now My Cydia Logo Is White What Now I Just Boot Tethered Now Nothing Worked An When I Did Just Boot Tethered Now It Said

    Unrecognized Build.
    Fingerprint:3b200e51e651f7084767de500b1c17f
    Please Check Whether You Have The Latest Version Of Redsn0w And Whether This iOS Version Is Supported Yet. Can You PLease Help = //

    • macboy95

      leave it 4 now cuz red snow hasn’t been updated yet and this happened to my dads iphone and now to wont restore or do anything so im just telling to what will happen m8 

  • thebigstechandipod

    this does work if you have a 4g iPod just tell redsn0w that is it on ios 5 and not ios 5.0.1 then everything should work

    • http://www.facebook.com/people/Manuel-Lopez/100001043261647 Manuel Lopez

      how do you tell redsnow that it is on 5.0??? that way it can ve supported by redsnow

  • KA POW!

    suck a dick

  • Fuckyou47

    dumb bitch this dosent work ass hole

  • Saadtahir1997

    not workerd for me either error coming plzzz help

  • skemsa

    doesnt work

  • Cowboysfan4eva62

    doesnt work? it says…this device doesnt support untethered optionshelp anyone?

  • zeebo6230

    I can’t get the second step either

  • zeebo123

    How can I install the IPSW 5.0 PLEASE HELP!!!

  • Help??!?!?

    after install cydia i go into dfu mode and it does not say my device is connected? like what the fuck?

  • Joe ;)

    Anyone else stuck at reboot?

    • Kajabrar

      Yes, all i get is a blank screen

  • Rsola99

    I can’t get the second step. 
    . Go to “Extras”, hit “Select IPSW”, point it at iOS 5.0.1 and then go back to the main screen (NOTE if you get errors while pointing it at 5.0.1, just point it at the 5.0 IPSW for your device)

    • Di

      how to you point it at 5.0 IPSW??

  • mo

    i have iphone 4 ios 5.0.1 I downloaded IPSW 5.0.1 and when I try to direct in the “Select IPSW” step, It say “That IPSW is not supported by this version of redsn0w.

    Like
    Reply
    fingerprint:231aa2ae683efbf270c71ebe7fe944ce

    • Harvidhami

      same thing is happening wit me :( tell us solution man

  • danny

    i have the same problem @ john  this guy is confusing first he says to download 5.0.1 then 5.0?

  • john

    I have window 7 on my laptop and unfortunatly i have upgraded my iphone to
    IOS 5 ,when i try jailbreak IPhone using redsn0w_win_0.9.9b8 i get thi error
    “That IPSW is not supported by this version of redsn0w ”

    Fingerprint:
    a16109c93c73dc67834ebf5a67b50c19c79b8db5

    I also tried custom IPSW option but i get error saying “this verion of redsn0w does not support thi feature”

  • HELP PLEASE

    it doesn’t work!!!!

  • help me and answer it

    ipod touch 4g use 5.0 IPSW or 5.0.1 IPSW??

  • HELP ME

    Please reply…I have rebooted my iPod after downloading this app off Cydia and the apple logo just stays there for ages. I hope it is not broken! PLEASE HELP!

    • Trlolololo

      you must just restart your ipod with redsnow :) it is not broken

      • HELP ME

        OK! Thanks alot!

  • Kelliblue

    ok im one of the many who can’t get redsn0w to recognize ipsw 5.0 OR 5.0.1.  Neither work, and I keep getting the “this version of redsn0w does not recognize this IPSW.”  Do we need a different version of redsn0w?  Why is it not working???

    • zeebo6230

      I have the same problem dude

  • Saifdesign

    what do you mean point it at 5.0 ??  

  • DeadMau4

    This Works All You Have To Do Is Follow Instructions And Your ipod Touch / Iphone will Be Finee . 

  • Shartl9

    Great. It doesn’t work for the only device I haven’t jailbroken. MY IPAD 2 NEEDS A JAILBREAK AND FAST!!! I’m starting to think the iPhone dev team and comex are starting to get lazy with the iPad 2 jailbreak.

    • Husandeep Singh

      THEY ARE NOT!!! The iPad 2 was jailbroken at ios 4.3.3 but apple patched it and patched any other exploits found by hackers.

  • Kranthi457

    I have window 7 on my laptop and unfortunatly i have upgraded my iphone to
    IOS 5 ,when i try jailbreak IPhone using redsn0w_win_0.9.9b8 i get thi error
    “That IPSW is not supported by this version of redsn0w ”

    Fingerprint:
    a16109c93c73dc67834ebf5a67b50c19c79b8db5

    I also tried custom IPSW option but i get error saying “this verion of redsn0w does not support thi feature”

    Please help :(

    • Itony97

      Download the 5.0.1 firmware from the site given above. MAKE SURE that you have the current redsn0w software (also linked above). It sounds like your redsn0w is out of date :/

  • Prabhat Singh374

    the pineapple logo in not going  i waited for half an hour for that

  • Goodluck

    Too everyone who failed to jailbreak and is getting usb errors and recovery errors. Ya your iPod is toast and can never be fixed ! BEST OF LUCK TO YOU.

    • zeebo6230

      no your lieing. all you have to do is reboot ur idevices with redsnow

    • Itony97

      Dont listen to him! just Restore it. 

    • Yjhgjfghjfghjfghjfghj

      or you can restore it

  • Laurajohnson76

    Hi  I have just done the jailbreak and am now doing the “just Boot”. It has been loading for over 30 minutes now, is this alright or has something gone wrong. I have the iPhone 4. All i see is the apple logo then the timer 

  • NiceguyPD

    wheres the IPSW

    • matt776

      If you were smart and not so much on the side of being a dumbass then you would of extracted the IPSW file to the desktop

  • Lol

    How do I find my firmwear :@ 

  • Kyle0522

    my ipod keeps on going to recovery mode and im using 5.0 ipsw for my ipod 4 5.0.1

    • Tcb

      where did you get the ios 5.0 ipsw

      • matt776

        You really that fucking stupid to look on the site that he gave you?! I mean its really right on that page! fucking retard

  • Rachel Stewart67

    download ipsw 5.0 NOT 5.0.1 and it works and NO it dont unlock the networks you need to pay for that ( ive not found anything that can do it yet )

  • MW3

    When i try to select IPSW it says that IPSW is not supported for this version of redsnow

  • Naylous111

    i dont get the ipsw part

  • Lucas J

    does this unlock the phone to all networks aswell??

    • matt776

      No! If you think that it did than you must be a retard. You have to pay for that extra service. LMFAO…

  • 20kidcudi

    thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • TheTiger2398

    I also should’ve mentioned that I have the latest version of Redsn0w.

  • TheTiger2398

    I tried both the 5.0.1 & the 5.0 but it still can’t recognize the firmware. I really want this done. Can you please help me?

  • utsav

    gimme the link to download ios 5.0

    • matt776

      You really that fucking lazy to look on it IPSW page provided!? Seriously….!? Thats just complete laziness right there!

  • Kobeb840

    redsnow0.9.9b8  doesnt work with 5.0.1 psw 

    • matt776

      If you read the fucking instructions it says “if 5.0.1 doesn’t work then use 5.0″ LMFAO….

  • Rmcgraw1014

    ok can how do you downgrade to 4.3.3? can you cause this isnt working

  • Tisroque

    Hi, is there anyone here using H2o as their service provider, does it work with 5.0.1???

  • Anonymous

    I’m getting my iPhone 4 tomorrow, but would this clear my basebands? and what would happen to my phone if that is the case?

  • Rizh

    nice job
    how can i restart my device without connecting it with redsnow (except semitethered) or not.
    because semitether is not working on my phone.

  • karen reyes

    download the 5.0 i was fine…but i hit other roadbumps..but maybe u wont. Goodluck

  • karen reyes

    Hello,
    So i have the 5.0 IPSW then it prompted me to find out after how many weeks my particular 3gS was released it was the newer one after 41 weeks.
    then as im “jailbreaking” it stops and says i have a usb problem. however before that it simply told me it failed now i just keep getting that error usb
    What to do?
    Thanks =)

  • Babyserene_95

    I downloaded IPSW 5.0.1 and when I try to direct in the “Select IPSW” step, It say “That IPSW is not supported by this version of redsn0w. Any solution?

    • Yrlehr

      I have the same issue can any one help??

    • alexiphone4life

      same problem, any respond?

    • Butters

      You dont download 5.0.1 you download 5.0

      • tcb

        from Where do i get 5.0??

        • matt776

          Its right there on the same page as all the IPSWs!!!

  • Jskyline01

    I doeloaded all of the stuff you said, opened redsnow, went to extra’s, select ipsw had it on my desktop but it wont select it to run…anybody??

    • Butters

      Its supposed to be 5.0, maybe you downloaded 5.0.1?

  • Austin_j_young

    Im having trouble with the just boot step. Everything went perfect but when its rebooting at the end it just keep flashing between the apple symbol and the loading symbol and nothing happen. What should I do?

  • John

    Fingerprint 13c7916459738ab218e320b86bc0df­­11f45b2390 I get this…

  • Ali-J

    my iphone4 is now blocked i cant use it ..!! after jailbreaked my iphone i installed cydia than i Tryied to install installous and i should restart my phone now i couldn^t turn it on ..!!! 

    when i try to start it , the apple is standing on my screen ..!! 

    any solutions .. please 

    • Naikdhruv09

      connect yur phone to pc and open redsnow software then select ipsw after that dont close it now see on top just boot it .after that as per instruction do dfu mode . yur iphone will be start

    • Homen09

      u need to switch off your device then open up cydia from your computer and go to extras then select Ipsw then click back and select just boot and your device would go back to normal.
       
      Also you will need to install something from cydia and its called semitether .
      and you will be able to reboot your device, but ur only aloud to ring people and go on safari and you would need to do the same thing  

    • Leafhunter

      same thing here but i fixed it you gotta recover your ipod

  • David

    I’m also wanting to know if it is safe to jailbreak my White iPod touch 4G, which is already running 5.0.1? Thanks in advance.

  • someone

    could u make a new program that will include ipsw 5.0.1 itself? it’s not working for me

  • SCUD

    hey iCU..is it perfectly safe to jailbreak my 5.0.1 using the 5.0 IPSW..won’t it affect anything?

    • matt776

      The top 5 list of the dumbest questions I have seen on here, this is number 2. You really the dumb asking this!? All it does is just puts it back to firmware 5.0…..Sereiously :/

  • Simeon0814

    hello , i need help with my iphone 3gs , i followed all the instruction using windows and in the course of jailbreaking this notice appeared ( mounting roofs as read-only……ERROR, after 60000 ms !! giving up ..)

  • Butters

    I didnt watch the video but just followed the written instructions and I was at the part of “preparing filesystem”. I accidentally locked my ipod and now when I try to reboot it with redsnow it doesnt boot but just keeps showing the loading circle. Should I restart the “jailbreak and install cydia” option or is there something else to do to fix it? I dont know how you respond but if you cant reply here then email to Butters6227@aim.com
    Thanks

  • Zheid_2000

    hi, i tried to jailbreak it was successfully  jailbroken and then i tried to install ultrasnow from cydia not stuck to apple logo  and then i tried to restored it wont jailbreak and cannot connect to youtube iphone 4 5.0.1  version

  • Laiden_M

    It wont show me winterboard or anything, what do i do?

  • http://twitter.com/naruto7_ kyle worm

     i got it working
    are u guys sure its not untethered i jailbreaked it and booted it tethered and i have restarted several times and im not even using semi untethered and its working fine for me

    • Shai_95

      which iphone are you using???

  • http://twitter.com/naruto7_ kyle worm

    “That IPSW is not supported by this version of resn0w
    Fingerprint:
    13c7916459738ab218e320b86bc0df11f45b2390″
    don’t tell me to point it at the 5.0ISPW for the ipod touch 4g when it isn’t listed only 5.0.1 is listed on the download

    • Simeon0814

      i had the same problem while using windows 7 , and wen i tried XP pack 2, it went through 

      • Yrlehr

        How do you do that ??

  • Rmiller1767

    how do i know if mine is cdma or gsm? i have the iphone 4 and how do i get the ipsw icon so that i can drag it to the jailbreak?

  • http://twitter.com/Biofryd Nikolaj Jensen

    Hi guys.

    I really hope you can help me. I followed the guides to the letter, pointing to 5.0 instead of 5.0.1, tried just boot several times. But after jailbreak is done, and after doin just boot, my device is stuck with a ‘connect to itunes’ screen, and there is nothing I can do. I have iphone 4 gsm, and downloaded the latest ispw files and redsnow. 
    When trying to ‘just boot’ I get error: unrecognized build ffffffffffffffff70c71ebe7fe944ce
    What am I doin wrong? Any help will be much appreciated

  • http://twitter.com/Biofryd Nikolaj Jensen

    Hi guys.

    I really hope you can help me. I followed the guides to the letter, pointing to 5.0 instead of 5.0.1, tried just boot several times. But after jailbreak is done, and after doin just boot, my device is stuck with a ‘connect to itunes’ screen, and there is nothing I can do. I have iphone 4 gsm, and downloaded the latest ispw files and redsnow. 
    When trying to ‘just boot’ I get error: unrecognized build ffffffffffffffff70c71ebe7fe944ce
    What am I doin wrong? Any help will be much appreciated

  • Bullyjon

    the same with me this  IPSW is not supported by this version of redsnow what should i do?

    • http://besttechinfo.com Tanner Marsh

      Point it at 5.0 (as stated in the instructions)! 

      • Juls0702

        What do you mean by point it at 5.0? There’s only that one IPSW file…

        • Shai_95

          go on fellixburn n on the home page look mid section n yu shud see the 5.0 one

    • Simeon0814

      i had the same problem while using windows 7 , and wen i tried XP pack 2, it went through

  • Karam Gorgees

    Help it says panic We are hanging here…. what can i do???

  • bullshit

    fucking bullshittttttttttttttttttt IPSW is not suppored by this version of redsnow !!!!!!!!!

  • Sirjuliusarquero

    I downloaded iPhone4,1_5.0.1_9A405_Restore.ipsw from the link that you’ve given. But the iOS that was downloaded to my computer was iPhone3,1_5.0.1_Restore.ipsw, is that normal? When I tried it with the redsnow 0.9.9b8 that I also downloaded from the link you gave, everytime I choose Select IPSW, then choose iPhone3,1_5.0.1_Restore.ipsw, a pop-up box says Unsupported IPSW. That IPSW is not supported by this version of redsnow. What am I doing wrong?

  • Bricden

    Your instructions confuse me.  Can you please explain to the Windows 7 users how to exactly do everything.  You say to run it under a program of windows xp and for a retard computer awarness guy like me.  I have no fucking clue what you mean by that.  Your training will be greatly apprectiated.  I have several other buddies who are doing the same thing with windows 7 and we cant figure this out. 

    • matt776

      Alright, so basically its somewhere around a good 5 step process:
      1. Don’t go fucking getting pissed off at him when he is doing the video on a Mac.
      2. When you get Redsn0w on to your desktop you have to right click it, and then click on the compatability option on the right click menu. Its usally like the 3rd choice down.
      3. After you get the compatability option up then you will go to the Windows Server XP 2 and click it once, then click “Ok” or whatever is at the bottom right corner of the box that popped up.
      4. When you have fixed the compatability that it runs on you then need to go back and right click on to Redsn0w and then click on the “Run as Administrator” option on the menu. Its usually like the first or second one right there.
      5. After you have opened up Redsn0w as an admin and went through the compatability deal then go through the rest of the instructions that he has laid out on here. They are simple and easy to follow.
      I know that he didn’t go into more depth about how to actually run Redsn0w on a Windows 7 PC, and that was something that everyone has seen when they right-clicked on a file/folder/program on their desktop or he just forgot about adding the process on how to do it. If you have anymore questions or problems with Redsn0w or anything else feel free to send me an e-mail. I’ve jailbreaking iDevices for free/cash for a some time now. Hit me up with an e-mail with your problems.
      Email: matt776@live.com
      Hope this helped!

  • Aksljohnson

    All Things Apple Giveaway

    All I do is win win no matter what!! Lol

  • Adelrocktheworld

    thanxxx dude

  • http://www.facebook.com/almeida9 Tiago Almeida

    Perfect! no issues to report! Keep it simple and efficient! cheers!

    btw do you have unlock for 3GS with ios 5.0.1?Ty

  • Pavelmixlove

    i have missed the window to update to 5.0 my 3Gs  is running on 4.3.3 and  my baseband 6.15.00. is worth the up date?

  • Yourmajesty25

    ipsw not supported

  • Blake Lupo

    My Cydia App is white and wont do anything… Help Please

    • Blake Lupo

      Nevermind fixed it

      • Mayurbhakta90

        how did you fix it

    • Burhanasifn_1

      you should go to extras and select just reboot

  • Sonia_o

    i have ipad with ios 5.0.1 and it is not recognizing the firmware please tell me hat should i do???

  • WilliamSmith

    My ipod is stuck at the pineapple logo after first reboot. Please Help

  • JesseAdelle13

    I don’t understand what you mean by “point it at 5.0″ instead of “pointing it at 5.0.1″ it took like 2 hours to download the 5.0.1 onto my computer. This is very frustrating. 

  • Pradie

    how do i installl installous 4, thnx 

  • Dymsis

    Is this the same for 5.0.1 ‘not’ Beta??

  • jave

    i badly need your help here. recently, i followed all the steps being demonstrated in your video and did even rechecked on your written instruction on how to jailbreak the ipad with newest software. i had just successfully jailbreak my ipad 5.0.1, and even used the cydia for awhile and some sources on it. but after i installed the installous 4 it says that i need to reboot my idevice. so i click to what has been poped-up on the screen. almost 15-20 minutes have already passed, my idevice could not turn on, its just always on a black background with an apple logo then after a matter of seconds, it will then turned off. 

    do you exactly know what happen to my idevice? why is it not turning on? pls pls pls. thanks a lot! 

    • Yfan3

      i have the same happening …did u solve the problem?

  • Brandonvass

    thanks!!

  • Krunkdb

    okay i downloaded the link for the ipsw but its saying its unsupported on my version of redsn0w which is 9.9.b8

  • Papuller86

    i tried to choose firmware for 5.0 and 5.0.1 im using redsnow 0.9.9b8 both times it says that its not supported, im using windows 7 and i ran the program under xp service pack 2, ive been tring for hours and i cant get my iphone 4 to jailbreak, please help!!! my phones version is 5.0.1 (9A405)

    • Ilive4msubulldogs

      Same crap to me-please reply with a fix

  • Sofigon92

    please, I’m from Spain… I would like to know why IPSW is not supported by the version of Redsn0w. Help me please

    • http://besttechinfo.com Tanner Marsh

      Go ahead and point it at 5.0 then! 

  • rjom

    does this work o ipad wifi+3G iOS 5.0.1?

  • Ali_magealid79

    can plz tell me why i got the cydia with empty sources and nothing work in it ..ty

  • http://www.facebook.com/people/Vercingetorix-Reyes/100000646490596 Vercingetorix Reyes

    Great video, keep it up!! 

    All Things Apple Giveaway

  • jaz

    thehered

  • http://www.facebook.com/profile.php?id=1751907613 Andrew Pelletier

    It says my firmware doesn’t work with this version of Redsn0w

    • Sonia_o

      it is not recognize my firmware……mine is ios 5.0.1 please help me ……:(((

  • Batman1995

    is this tethered or untehered??

  • Guest22

    Is iPhone3,1_5.0.1_9A405_Restore.ipsw not supported in redsn0w_win_0.9.9b8?
    It prompt not supported message when I chose it. Any advice?

  • Cobraip4

    whAT about iphone 4s?

  • Boipie01

    samething for my ipod touch 4g That IPSW is not supported by this version of Redsn0w when i use the 5.0.1 firmware from my itune librairie or with the firmware i downloaded from here.

  • Daniel

    that’s right it doesn’t work with iphone 4 it doesn’t recognize the firmware

  • Rolando Soriano

    it doesn’t work with the iPhone 4 firmwareThat IPSW is not supported by this version of Redsnow

  • http://www.facebook.com/people/Anthony-Buttillo/100001373827892 Anthony Buttillo

    wish it was untethered

    All Thing Apple Giveaway

  • David Hernandez

    great

  • http://twitter.com/Hurlfox101 Ryan Thompson

    All Things apple gieaway!

  • Lightning1211

    Cool(:

    All things apple giveaway

  • Parbat

    how do i get the installous???

  • http://www.facebook.com/profile.php?id=100001741911265 Alfonso Torres

    thanksall Thing Apple Giveaway

  • http://www.facebook.com/profile.php?id=1053694786 Patrice Ngassa

    Thanks though! but not ready to update…All Things Apple Giveaway

  • Bryl3_pnoy23

    all Thing Apple Giveaway

  • http://twitter.com/curran_josh Josh

    All Things Apple Giveaway